Need An Old Fence Gone?
Need A New Fence?
Need DIY Tips For Fence Removal?
Call Us Today

Fence Removal Cost - The Price You Pay To Remove Your Fence

Many property owners find themselves in the position of needing to remove an existing fence. Whether you’re planning a major renovation project, replacing a damaged fence, or simply want the old fence gone, you need to know how to calculate the costs associated with removal services of your fence Fortunately, understanding these costs is simpler than you might think. Let’s take a look at what goes into determining the cost of your fence removal. 

Fence Size Matters  The size of your fence is one of the biggest factors in determining the cost of its removal. A larger fence will require more time and materials for dismantling and hauling away debris. If you have a large area that needs fencing removed, this can significantly drive up the price of your project. 

Fence Location Is Key  Your location plays a big role in calculating costs as well. Depending on where you live, there may be regulations or ordinances stipulating what type of fence material can be used—and how it must be disposed of properly when removed from a property. Costly permits may also come into play if you’re located in an area with strict building codes. All this means that location can affect both your removal costs significantly.    

Fence Material Type Makes a Difference Different types of fence materials require different methods for removal. Wooden fences are typically easier to remove than metal chain link ones, but they may also require additional tools to break them down into smaller pieces for transport off-site. You’ll also need to consider any hazardous materials that may exist on-site when removing certain types of fences (e.g., lead-based paint). This could add additional fence removal cost if special measures need to be taken during dispensing due to local laws or regulations related to hazardous waste dumping. 

Knowing what goes into calculating the cost of removing and disposing an existing fence is essential for property owners who are planning renovations or replacing damaged fencing on their property. Size, location, and material type are all important considerations when it comes to determining how much money you should budget for your fence removal project—so make sure you do your research before taking on such a task! With this knowledge, you'll be better equipped to get an accurate estimate from professionals like Mammoth Dump so that your next fence project goes off without a hitch!

Want To Cut Cost On Your Removal? DIY Fence Removal

If you own property or manage a business, there may come a time when you need your fence removed. This can be a costly and time-consuming process if left to professionals, but with the right knowledge and tools, it is possible to do it yourself. Mammoth Dump explains the steps needed to take on your DIY fence removal and how you can save money doing so. 

1) Assessing Your Fence - The first step in removing your fence is assessing it. You'll want to make sure you have the correct tools for removal. It’s also important to note whether the existing fence materials are reusable or not as this will affect what type of replacement material you should purchase for installation.  Additionally, determine if the fence was built using screws or nails as both require different removal techniques.  Finally, assess whether any part of the fence has been damaged due to weathering or improper installation in order to avoid further damage when taking down the old fencing. 

2) Fence Post Removal - Our post removal method, once you have assessed your existing fence and gathered all necessary tools, it's time to start removing posts from the ground.Typically, posts are secured into either concrete footings or by being buried into soil and held in place by gravel back fill. For concrete-secured posts, use an electric drill with masonry bit attachment to loosen post bolts before attempting to remove them from their footing. For soil-secured posts use a spade shovel or post hole digger to carefully excavate around post bases until they can be pulled out of their hole with minimal effort.  

3) Dismantling Rails & Panels - After removing posts from the ground, begin dismantling rails and panels that attach each post together by unscrewing fasteners along each joint connection point (screws/nails). If screws were used in installation, use an electric drill with screwdriver bit attachment for easy removal; otherwise use pliers/wrenches for nails/bolts respectively. Continue this process until all rails/panels have been removed from their joints one at a time while maintaining as much integrity of reused material as possible (for reuse).  

 4) Disposal & Cleanup - After dismantling all materials from each other, stack old fencing components into piles according to designated type (posts vs rails/panels) in order for easy discarding afterwards. Once complete, clean up debris around site using broom/shovel and dispose offsite using dumpster rental service OR recyclable materials at local recycling facility (depending on material composition).  

 5) Installation Preparation - Now that existing fencing has been successfully removed from site area its now ready for new installation! Obtain necessary materials beforehand (posts/rails etc.) as well as any additional hardware required for assembly based on desired design specifications before commencing install new fencing next day after removal completion (materials may need time adjust climate conditions).  

 6) Installation & Finalization – Begin installing  your new fence following same procedures taken during dismantling of old fence (attaching posts into foundation footings / attaching rails & panels between them). Use levelers throughout entire process in order ensure proper alignment & straightness prior finalizing install by tightening fasteners along joints.

 7) Final Inspection – Double check entire site perimeter once again after completing install(s), ensuring that all fasteners along rail/panel connections are tightened properly & securely while also confirming vertical alignment of posts via levelers before calling job complete!                

Removing an existing fence doesn't have to be expensive or difficult if done correctly! With Mammoth Dump’s step-by-step instructions above, you can safely and effectively remove your own current fence without breaking the bank—allowing more room in your budget for higher quality replacement materials! So remember these tips when considering DIY removal projects next time around!

Call Us Today

Pull That Fence & Post Out With The Use Of Simple Tools

If you're embarking on the home improvement project of fence removal, you'll want to make sure you have all the right tools for the job. You'll need several items specifically designed for wood to make sure that your fence removal is done safely and efficiently. Choosing the right type of saw, nails, screws and fasteners, as well as gloves, safety glasses and dust masks are essential to protecting yourself during home improvement projects. Furthermore, having a few extra tools such as a pry bar and foundation spike maul will make fence removal an easier task- saving you time and energy in the long run. Don't skimp on supplies; invest in quality tools today for home fencing projects!

Fence Extraction Checklist - Everything You Need To Know About Your Fence

  1. Work gloves: To protect your hands from splinters, cuts, and abrasions.

  2. Protective eye wear: To protect your eyes from debris and dust.

  3. Sledgehammer: To break up the fence panels and posts.

  4. Reciprocating saw: To cut through any metal or plastic components of the fence.

  5. Pry bar: To help lift and remove the fence panels and posts.

  6. Shovel: To dig up and remove the fence posts.

  7. Wheelbarrow: To help transport the removed fence panels and posts to a dumping area.

  8. Measuring tape: To measure the length and height of the fence to determine how much material you will need for the new fence.

  9. Marking paint or flags: To mark the location of underground utilities and other obstacles before digging the new fence posts.

Note: Depending on the type of fence you are removing, you may also need additional tools such as a fence post puller or fence post driver. You may also want to consider renting or borrowing larger equipment such as a skid steer or excavator if you are dealing with a large or heavily-constructed fence.

Have Other Junk Laying Around? Junk Removal Services Also Provided

Mammoth Dump is the perfect choice for your removal and cleanouts needs. Whether you are a home owner looking to get rid of unwanted furniture or an office manager needing to shed some clutter, Mammoth Dump has the right solution with their high quality removal services. They offer both residential removal and commercial removal services, making it easy for you to have all of your removal needs taken care of in one convenient location. Furthermore, their rates are incredibly reasonable so anyone can afford them. So if you’re looking for high quality junk removal services at an affordable price, Mammoth Dump just may be the answer.

Call Us Today

© 2023 Mammoth Dump               Powered by Dumpster Rental Systems